产品特点；
钣金件采用电脑激光切割,皮实厚重。美观大方。电泳防腐工艺，表面800μm喷塑处理，可保机身十年不腐。
轻巧折叠设计，5分钟可以拆装支架，轻松放进您的轿车尾箱。
深度防水设计，漏电保护设计，保障施工安全。
具有6根刀轴的长寿命铣鼓（刀具），采用高分子材料及cd750（钨钢）、mg(镁)、zn(锌).mn（锰）ag(青铜）q （镉），首先提高金属淬透性从而提高合金的抗拉强度和硬度;通过加入以上几种合金元素并配以合适的热处理工艺,可以进一步提高铣鼓刀轴的综合力学性能。如硬度.抗拉强度,冲击韧性。屈服强度。工作寿命是普通钢胚铣鼓的十倍以上。
本款机器净重150kg 正常铣刨深度可达0-6mm， 预留配重位及水箱位，如需深度8mm左右的铣刨只需加配重块。建议Zui大配重可达300kg，调整配重可以达到您预想的铣刨深度，Zui适合进行大工程量的铣刨工作真正做到小机器，大用处。
优质的硬质合金刀片：硬度高（86～93hra，相当于69～81hrc）。热硬性好（可达900～1000℃，保持60hrc）耐磨性好。硬质合金刀具比高速钢切削速度高4～7倍，刀具寿命高5～80倍。可切削任何高强度的混凝土。200型铣刨机可打磨1500平方。220型2000平方 255型3000平方 (c50混泥土)
抓地微调设计 解决因长期使用后铣刨偏向的问题。
选用国内知名厂家定制电机，动力澎湃。提升转速，优化扭力。
铣刨宽度设计有200-220-255mm。单次铣刨深度可达5mm
具有创新铣刨角度微调设计，铣鼓倾斜Zui大可调配15°，用于斜面的铣刨。
具有深度指示刻度盘，采用精密螺距调节，可控制铣刨深度。
具有吸尘接口，可接吸尘设备。
具有专利的刀架快速拆装设计，可在5分钟内完成刀具的安装或拆卸装有安全开关，可快速关闭发动机装有铣边器，可任意安装和拆卸
the sheet parts with good product appearance are cut by computer laser, which are very sturdy. electrophoretic anticorrosive technology and surface spray treatment(800μm) can protect the machine from rot for more than ten years.
he lightweight folding design can help the users disassemble and assemble bracket in five minutes, the users can fit into a car tail box.
the design of waterproof depth and leakage protection guarantees the construction security.
the milling drum (blades) carrying 6 axles is made by polymers and cd750 (tungsten steel), mg (magnesium), zn (zinc). mn (mn) ag (bronze) q (cd). the operating life of this type machine is ten times more than ordinary machine’s.
the milling width is 200-220-255mm. 5mm each time.
the net weight of the machine is 175kg and normal milling depth is up to 0-5mm. an allowance for weight and water tank, which can reach your desired milling depth, the users can put weight to mill to 8mm if necessary.
high for carbide blade: high hardness（86～93hra, equal to 69～81hrc）, hot hardness（900～1000℃，60hrc）, good wear resistance. the carbide blades are 4-7 faster and the service life is 5-80 times than high speed steel cutting, which can mill any high strength concrete.
the design of catching to fine-tune solves the problem of milling deflection after long-term use.
the power-driven machine, which can advance machine speed and optimize torsion, from well-known factory can supply enough energy.
innovative milling angle fine design, milling drum tilt can reach 15 degrees, for inclined plane milling.
a depth indicator dial, using precision pitch control, can accurately control the milling depth.
a cleaner interface, can be connected with a dust collecting equipment.
the patent of rapid disassembly and assembly design, can be completed within 5 minutes of mounting or dismounting the machine. e with safety switch, can turn off the engine. a milling device, can be installed and dismounted freely
【适用范围】
◆对高速铁路的桥梁防水层的基面清理、找平施工
◆对混凝土、沥青道路、环氧树脂、耐磨地面进行轻度拉毛
◆去除地面涂层、油漆、各种道路标线
◆地面受损、积污需要翻新时，去除旧地坪表面
售后服务：发货之日起保修期6个月
